Full Frequency Detection and Omnidirectional Jammer

• Detection Weight: 16kg
• Detection Size: Radius 610mm*440mm
• Jammer Weight: 18kg
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HF102E-D
• Jammer Size: 470mm *400mm *170mm
• Distance of Interference: 3km
• Single Station Detection Radius: 5km
• Transport Package: Aviation Box Packaging
• Specification: HF102E-D
• Trademark: HFHW
• Origin: China
• Production Capacity: 100
• Package Size: 47.00cm * 40.00cm * 17.00cm
• Package Gross Weight: 20.000kg

Product Description

    The full-frequency detection equipment mainly consists of array antennas, RF circuits, multi-channel synchronous receivers, GNSS positioning modules, etc., to achieve drone detection and discovery in the entire frequency range. The equipment is based on AOA + TDOA composite positioning technology, and has functions such as drone detection and warning, model recognition, positioning tracking, and trajectory playback within and outside the range of multiple stations. It can freely expand any number of detection equipment according to the monitoring area.
    The omnidirectional and full-frequency interference equipment emits electromagnetic waves to interfere with drone satellite navigation signals or block the communication link between the drone and the remote control, so that the drone produces the effect of forced landing or return. The equipment supports multiple modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.

     The omnidirectional and full-frequency interference equipment technical parameters: Interference technical index Signal source standard Support DDS sweep source, also support switching FSK, BPS, QPSK, QAM, 16AQM, 64QAM, OFDM and other modulation source modes Interference frequency range Interference channel output can be set arbitrarily in the 300MHz-6000MHz frequency band Typical interference band 400MHz, 600MHz, 800MHz, 900MHz, 1.1GHz, 1.2GHz, 1.4GHz, 1.5GHz, 2.4GHz, 5.8GHz (each frequency band can be turned on or off in any combination) Distance of interference ≥ 3km (0.1W radiation source) Gan Tong ratio Not less than 10:1 Interference angle 360 ° omnidirectional Antenna type High gain omnidirectional antenna Number of interference modules Not less than 6 Transmit power 100W/each interference module, interference transmission power software adjustable Interference effective time ≤3s Machine index Equipment size ≤ 470mm × 400mm × 170mm (excluding antenna height); antenna height ≤ 850mm Equipment weight ≤18kg Communication interface 1 RJ45 10M/100M/1000M self-adaptive Ethernet port Power requirements AC220V ± 10%, 50Hz, device power consumption: ≤ 1000W Working temperature -40ºC~70ºC Protection level Not less than IP65.

    The full-frequency detection equipment Main technical parameters: Detection technical index Detection system Radio passive detection Detection signal type Drone data transmission signal, drone remote control signal, WIFI system drone signal Detect type of drone The vast majority of conventional consumer drones, some unconventional drones, some fixed-wing drones, some crossovers Detect coverage band 300MHz~ 6GHz full frequency band detection Detection range Horizontal 360 ° omnidirectional Single station direction finding accuracy ≤ 3 ° (root mean square) Single station detection radius ≥ 5km (open environment, drone transmission power 0.1W) Detection altitude ≥ 500M (open environment, drone transmission power 0.1W) Multi-station detection accuracy Multi-station equipment in-app positioning accuracy ≤ 30m, out-of-app positioning accuracy ≤ 100m Number of multi-station deployments ≥ 3 Multi-station deployment interval ≥500m Target false alarm rate ≤ 5 strips/day (24H) (typical urban environment) Receiving sensitivity ≤-120dBm Time of first drone discovery ≤3s Machine index Azimuth calibration capability Built-in high-precision positioning module, automatic calibration (portable) Machine size ≤ 0021  610mm × 440mm (height) Weight of the whole machine ≤16KG Communication method Ethernet (100M/1000M network), 4G/5G communication Working temperature -40ºC~70ºC Power requirements AC220V ± 10%, 50Hz, device power consumption: ≤ 50W Protection level IP66