The full-frequency detection equipment mainly consists of array antennas, RF circuits, multi-channel synchronous receivers, GNSS positioning modules, etc., to achieve drone detection and discovery in the entire frequency range. The equipment is based on AOA + TDOA composite positioning technology, and has functions such as drone detection and warning, model recognition, positioning tracking, and trajectory playback within and outside the range of multiple stations. It can freely expand any number of detection equipment according to the monitoring area.
The omnidirectional and full-frequency interference equipment emits electromagnetic waves to interfere with drone satellite navigation signals or block the communication link between the drone and the remote control, so that the drone produces the effect of forced landing or return. The equipment supports multiple modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals. The omnidirectional and full-frequency interference equipment technical parameters:Interference technical indexSignal source standardSupport DDS sweep source, also support switching FSK, BPS, QPSK, QAM, 16AQM, 64QAM, OFDM and other modulation source modesInterference frequency rangeInterference channel output can be set arbitrarily in the 300MHz-6000MHz frequency bandTypical interference band400MHz, 600MHz, 800MHz, 900MHz, 1.1GHz, 1.2GHz, 1.4GHz, 1.5GHz, 2.4GHz, 5.8GHz (each frequency band can be turned on or off in any combination)Distance of interference≥ 3km (0.1W radiation source)Gan Tong ratioNot less than 10:1Interference angle360 ° omnidirectionalAntenna typeHigh gain omnidirectional antennaNumber of interference modulesNot less than 6Transmit power100W/each interference module, interference transmission power software adjustableInterference effective time≤3sMachine indexEquipment size≤ 470mm × 400mm × 170mm (excluding antenna height); antenna height ≤ 850mmEquipment weight≤18kgCommunication interface1 RJ45 10M/100M/1000M self-adaptive Ethernet portPower requirementsAC220V ± 10%, 50Hz, device power consumption: ≤ 1000WWorking temperature-40ºC~70ºCProtection levelNot less than IP65. The full-frequency detection equipment Main technical parameters:Detection technical indexDetection systemRadio passive detectionDetection signal typeDrone data transmission signal, drone remote control signal, WIFI system drone signalDetect type of droneThe vast majority of conventional consumer drones, some unconventional drones, some fixed-wing drones, some crossoversDetect coverage band300MHz~ 6GHz full frequency band detectionDetection rangeHorizontal 360 ° omnidirectionalSingle station direction finding accuracy≤ 3 ° (root mean square)Single station detection radius≥ 5km (open environment, drone transmission power 0.1W)Detection altitude≥ 500M (open environment, drone transmission power 0.1W)Multi-station detection accuracyMulti-station equipment in-app positioning accuracy ≤ 30m, out-of-app positioning accuracy ≤ 100mNumber of multi-station deployments≥ 3Multi-station deployment interval≥500mTarget false alarm rate≤ 5 strips/day (24H) (typical urban environment)Receiving sensitivity≤-120dBmTime of first drone discovery≤3sMachine indexAzimuth calibration capabilityBuilt-in high-precision positioning module, automatic calibration (portable)Machine size≤ 0021 610mm × 440mm (height)Weight of the whole machine≤16KGCommunication methodEthernet (100M/1000M network), 4G/5G communicationWorking temperature-40ºC~70ºCPower requirementsAC220V ± 10%, 50Hz, device power consumption: ≤ 50WProtection levelIP66
){kind=link}