The Uav Detection and Positioning System

• Customization: Available
• Package Weight: 2kg
• Transport Package: Aviation Box Packaging
• Model NO.: HF102A-D
• Trademark: HFHW
• Origin: China
• Production Capacity: 5000

Product Description

 

•  Disclaimer and Warnings

Once using this product, you are deemed to have carefully read the disclaimer and warnings, understood, recognized and accepted all the terms and contents of this statement. You undertake full responsibility for the use of the product and the possible consequences. You undertake to use this product only for proper purposes and agree to these terms and any relevant regulations, policies and guidelines developed. Users who are not responsible for damage, injury and any liability arising from the direct or indirect use of the product shall follow all safety guidelines including but not limited to. Even with the above provisions, the rights and interests of consumers are still protected by local laws and regulations and are not affected by this disclaimer.

• Product overview

1.  Introduction and basic functions

 The UAV manual detection and positioning system includes mobile hardware devices and locally installed web application systems, which can locate multiple drones and their controllers simultaneously within a certain range. The system continuously monitors the surrounding RF environment and shows the geographical location of the drone and remote controls.
The principle of the system is to receive the drone beacon signal and decode the information in the radio message. The extracted information includes but is not limited to the uav model (SN code), remote control geographic location, geographical location of the return point, geographic location, current location of the UAV, flight speed, flight altitude, etc. The system contains an API for forwarding the detection data to other systems to facilitate the connection between individual systems.

1. Product characteristics

Flying hand positioning	The single machine can locate and display the pilot position in real time
Uav positioning	Can locate the flight position of the UAV
Unique identity	The unique serial number of the UAV can be identified
Multi-unit networking	It can intervene in the back-end control platform online, and the multi-machine combination covers a large area
Mobility response	Second level deployment, boot on
Mobile portable	Portable design, small size, carry around

1. operational principle

 

• safety instruction

1. General precautions

(1) Line investigation
Before use, check whether the power supply and antenna are properly connected. We should check and handle the cable of the flying positioning equipment to check whether the cable connection of the flying positioning equipment is firm to prevent the plug from falling off and the connection is not strict. After the confirmation, it can be powered on.
(2) beware of short circuit
 To locate the plug of the equipment, wire battery storage, properly avoid moisture or contact with water, to avoid the occurrence of metal parts exposed, once there are problems, should be dealt with in time to prevent leakage, short circuit.
However, it should be noted that it is not allowed to handle the flying hand positioning equipment without authorization, but to ask professional repair personnel to deal with it. If the wrong lead will cause irreversible damage to the flying hand positioning equipment, and even lead to its direct scrap.
(3) The storage system of the flying hand positioning equipment should be checked regularly
We will regularly check the flying hand positioning equipment information storage space is sufficient, memory storage equipment whether damage phenomenon, battery is sufficient to ensure that the storage system can work well, keep good working condition storage equipment memory space should be timely processing to prevent because of insufficient storage space and affect its work.
(4) Do not change the equipment parameters at will
The device cannot type information at will, because after the parameters change, the program will also change, and the data received by the receiver will also change, which will affect the accuracy and authenticity of the data obtained. If you must modify the parameters, please ask the relevant professionals to type, to avoid non-professionals to press the key operation, so as to avoid the wrong modification of the parameters.

1.  Note the antenna setting of the fly-hand positioning equipment

Ensure that the antenna installation is stable and not falling off and loose. The external antenna should be tightly connected through the cable and the antenna device of the flying hand positioning equipment can not be loose. Otherwise, the accuracy and stability of the receiver receiving the signal will be affected. In addition, the thunderstorm season should do a good job of lightning protection work.
(6) Stay away from the strong magnetic field working environment
(7) Notes in transportation
If the receiver needs long distance transportation due to special circumstances, it should do a good job of packing and take light light to avoid inversion and overloading. In the process of transportation, there should be professional shock absorption box and shock absorption equipment to avoid the external damage caused by the flying hand positioning equipment in the vehicle driving.
 Safety profile
Please read the following safety precautions carefully to avoid damage to this product or other products connected to the product.
Do not open the instrument and open the lid without authorization:
Without permission, users can not open the equipment without authorization, and it is strictly prohibited to open the product when the equipment is running;
No use with counter equipment:
When used together with the counter equipment, it will interfere with the signal received by the equipment, affect the measurement distance and GPS positioning, or cause the data to be inaccessible;
When a product fault is suspected, the operation is strictly prohibited:
If you suspect this product failure, please contact for testing. Any maintenance, adjustment, or parts more
The change must be executed by;

1. service environment

When the equipment is working, try to choose the commanding point within the range.


 

• technical parameter

4.1 Product Parameters

Detect distance	1-3KM (range depending on equipment installation antenna)
Detect the time	Normally 30 seconds (detection time may change as the drone distance increases)
Complete machine power consumption	50W
temperature resistance	- 30ºC~ 50ºC
weight	2KG
The detect detect can be detected	Phantom 4 Pro V2.0 Inspire series / Mavic series The Avata series / Matrice series, DJI Mini series / AIR series, DJI FPV series / MG-1P / T16 / T20
size	280mm * 150mm * 50mm

4.2 Antenna parameters
Antenna frequency band: 2.4G,5.8G
Antenna total length: 10cm
Unit beam radiation performance:
Cell beam downdip: 01°
 

test item	Index requirements	Test Frequency (MHZ)	Port number
			PO1
Horizontal flap width (3dB)	65±5 °	5700	114.78
		5750	119.06
		5800	105.32
		5850	101.94
		5900	95.57
Level in front of the comparison	>25dB	5700	3.83
		5750	3.96
		5800	5.59
		5850	6.56
		5900	8.54
Vertical face lobe width (3dB)	>15 °	5700	5.97
		5750	6.44
		5800	6.43
		5850	7.1
		5900	7.25
gain	>15dBi	5700	10.25
		5750	10.36
		5800	10.83
		5850	10.92
		5900	0

Antenna unit beam orientation diagram picture: